The Agilent G5664A is a fraction collector for analytical scale fractionation. The bio-inert fraction collector is designed with a metal free flow path for the sample. The pH range is 1 – 13 (short term 14 pH). For the Agilent 1260 Infinity Bio-inert LC system, Agilent uses highest quality materials in the flow path, which are widely accepted by life scientists, as they are known for optimum inertness to biological samples and ensure best compatibility with common samples and solvents over a wide pH range. Explicitly, the complete flow path is free of stainless steel and free of other alloys containing metals such as iron, nickel, cobalt, chromium, molybdenum or copper, which can interfere with biological samples. The flow downstream of the sample introduction contains no metals whatsoever.
Specifications:
| Type | Specifications |
|---|---|
| Delay volume | Approximately 50 μL |
| Maximum system flow | 10 mL/min |
| Fraction containers | Shallow or deep well plates up to 48 mm height (96 or 384 format) Test tubes up to 48 mm height Autosampler Vials (2 mL and 6 mL) Eppendorf safe-lock tubes (0.5 mL, 1.5 mL , 2.5 mL) |
| Fraction trays | Full trays (cover complete fraction collector) 4 well plates 40 x 20 mL test tubes (30 mm od, 48 mm height) 60 x 15 mL test tubes (25 mm od, 48 mm height) 126 x 8 mL test tubes (16 mm od, 48 mm height) 215 x 5 mL test tubes (12 mm od, 48 mm height) Trays with possibiity to add 1 aditional half tray 2 well plates + 10 x 2 mL vials ( + one possible additional half tray) 100 x 2 mL vials (+ one possible additional half tray) Half trays (up to 3 per fraction collector) 15 x 6 mL vial 40 x 2 mL vial Plates for well plate trays (2 or 4 per fraction collector depending on well plate tray) Eppendorf safe-lock tubes (27 x 0.5 mL, 1.5 mL or 2.5 mL) 24 test tubes (18 mm OD) 54 x 2 mL vial 15 x 6 mL vial |
| Cooling | Optional |
| Trigger modes | Time slices and peak (threshold, up-/downslope, upper threshold and timetable), Boolean logic for different detector signals, combination of different modes, manual trigger (supported with Agilent 1200 Series Instant Pilot) |
| Diverter valve | 3/2 valve, switching time < 100 ms |
| Max. pressure | 6 bar (diverter valve) |
| Environment | 4 – 55 °C constant temperature, < 95 % humidity (non-condensing) |
| Materials in flow path | PEEK, Ceramic, PTFE |
| pH range | 1 – 13 (short term 14 )1 |
