The Thermo Finnigan Surveyor Autosampler Plus is specifically designed to maximize throughput, the Finnigan Surveyor Autosampler Plus has a novel sampling arm design minimizing excess movement, maximizing the number of injections in a given time. Injection cycles less than 30 seconds can be achieved using the Finnigan Surveyor Autosampler Plus. The Autosampler Plus holds 200 standard 1.8 mL sample vials or a tray insert with three 96 or 384 well microtiter plates. The built-in syringe flush and needle wash minimze carryover. The Finnigan Surveyor Autosampler Plus heat exchanger equilibrates the mobile phase prior to sample introduction.
Specifications
| Vial Capacity | 200 vials with tray temperature control, Three 96 or 384-Well Microtiter Plates |
| Injection Precision | 1.0% RSD at 5 uL and higher |
| Minimum Sample Volume | 1 uL can be injected from a 5 uL sample |
| Injection Volume | 20 uL loop standard, up to 1000 uL injections with larger loops and syringe |
| Sample Carryover | 0.1%, 6 mL flush can be used for internal and external needle wash |
| Needle Height | Programmable in 0.1 mm increments.Active vial bottom search selectable on/off |
| Column Oven | 5°C to 95°C +/- 0.5°C selectable in 1°C increments. |
| Tray Temperature Control | 0°C to 60°C +/- 0.5°C selectable in 1°C increments |
| Remote Inputs | Pump Ready and Inject Hold |
| Remote Outputs | Pump Stop, Autosampler Plus Ready, Inject, and Gradient Start, 4 Timed Events |
| Remote Controls | Ethernet interface for PC-based software control. |
| Sample Preparation | Capacity for 4, 15 mL reagent vials for flushing, washing, sample dilution, and/or reagents for sample derivatization |
| Ambient Environment | 10°C to 40°C, 5 to 95% relative humidity, non condensing |
| Operating Temperature | 10 °C to 40 °C |
| Dimensions (H×W×D) | 37 × 36 × 50 cm |
| Power Requirements | 100/120/220/240 Vac nominal; 550VA, 50/60Hz |
| Product Certification | EMC, CE, TUV-C/US, FCC (EMI) |
