This Refurbished Waters NanoAcquity UPLC System with Waters ACQUITY 2996
PDA come with the following:
- Waters Acquity 2996 PDA with Nano scale flow cell installed
- Waters NanoAcquity Binary Solvent Mamager
- Waters NanoAcquity Sample Manager with attached column oven
- Waters Sample Tray
- Essential cables for full operation
Maximum resolution – optimized system to drive 1.7 µm BEH particle technology to yield maximum peak capacity for complex mixtures.
Maximum reproducibility – direct nanoflow control and a novel, movable heating and trapping module for <0.25-minute standard deviation run-to-run reproducibility, even overlong gradients
Maximum throughput – BEH Technology columns enable faster gradient separations for simple mixtures, or when preforming targeted analyses without compromising resolution
Robustness – Nano-scale columns and fittings (PEEK, 1/32 stain-less steel and goal coating)provide reliable operation for up to 10,000 psi, with novel pressure trapping
Ease-of-use – Direct gradient control enables minimized tubing assembles and simplified loading and trapping schemes.
Enhanced on-board diagnostics – Efficiently monitor system performance
Combine with any MS – Control the NanoAcquity UPLC system from your Waters, Thermo Fisher Scientific,or ABI/MDS SCIEX mass spectrometer software platforms
UPLC and HPLC – Compatible with a wide range of conventional nano-scale columns with a flow range from 200 nL/min to 100 µL/min
Acquity 2996 PDA
Item | Specification |
Wavelength range | 190 to 800 nm |
Light source | Prealigned, Deuterium lamp |
Spectral Resolution/Optical Bandpass | 1.2 nm per photodiode with a total of 512 photodiodes, digital and optical (3D-mode) |
Digital Resolution | 1.2 nm – 600 nm (2D mode) |
Wavelength accuracy | ±1 nm |
Linearity range | 5% at 2.0 AU, propylparaben, at 256 nm |
Spectral resolution | 1.2 nm |
Baseline noise | ±1.5 × 10–5 AU peak-to-peak, dry, at 254 nm |
Drift | 1 × 10–3 AU/hour at 254 nm (after warm-up) ∆T ≤ 1°C per hour |
Operation temperature | 4 to 40 °C (39 to 104 °F), not to vary more than 1 °C per hour (to prevent drift) |
Relative humidity | 20 to 80%, noncondensing |
Power | Grounded ac, 100 to 240 Vac |
Power requirements | 100-230 VAC |
Frequency range | 50 to 60 Hz |
Path Length | 10 mm (standard analytical cell) |
Cell volume | 8 µl (standard analytical cell) |
Pressure Limit | 1000 psi (standard analytical cell) |
Wetted materials | 316 stainless steel, fused silica Tefzel |
Dimensions | Width: 11.5 in. (29 cm) Depth: 24 in. (61 cm) Height: 8.5 in. (22 cm) |
Weight | 31.5 lbs (14.3 kg) |
This Waters NanoAcquity UPLC with ACQUITY 2996 PDA is in good condition.
A 90 day warranty is included.
We have special expertise on analytical equipment. We encourage you to contact us to speak with one of our expert and professional team members.
Thanks for looking and we look forward to hearing from you!