This set includes:

(1) Agilent TV902 Turbo Vacuum Pump (Model No. EX8698933R001)
(1) Agilent TV801 Control Unit (Model No. SQ337)

The Agilent TV 902 Navigator is composed by a pump (869-8933R001) with an envelope with fins and a shroud with two fans and a dedicated navigator controller (SQ 337). The pump is equipped with a custom ISO 160 F high vacuum flange. 4 pumps are available.

The Agilent TV902 Turbo Vacuum Pump is capable of operating at high foreline pressures because of the high speed to compression ratio. These pumps have silicon nitride, ceramic bearings.

Specifications:

Pumping speed (l/s)	N₂: 680 l/s, He: 810 l/s, H₂: 850 l/s
Compression ratio	N₂: > 1 x 10⁸, He: 1 x 10⁵, H₂: 1 x 10⁴
Base pressure	< 1 x 10^-9 mbar w/ recommended diaphragm fore pump: (< 1 x 10^-9 Torr) (According to standard DIN 28 428, the base pressure is that measured in a leak-free test dome, 48 hours after the completion of test dome bake-out, with a turbopump fitted with a conflat flange and using the recommended pre-vacuum pump)
Inlet flange	custom ISO-160F
Foreline flange	KF-25
Rotational speed	38,000 rpm
Start-up time	< 4 minutes
Recommended forepump	DS-402, TriScroll 300
Operating position	Any
Cooling requirements	Forced air
Operating ambient temperature	+ 10°C to + 35°C
Bakeout temperature	120°C at inlet CF flange maximum 80°C with ISO flange
Vibration level (displacement)	< 0.01 μm at inlet flange
Lubricant	permanent lubrication
Noise level	< 55 dB(A) at 1 meter
Power supply Input voltage Input freq. Max input power Stand-by power Max operating power	100 – 240 VAC (± 10%) 50 – 60 Hz 600 VA 30 to 35 W 320 W with forced air
Protection fuse	1 x 8 A
Compliance with	UNI EN 292-1 UNI EN 292-2 EN-CENELEC 55011 IEC 1000-4-2 (ex 801-2) IEC 1000-4-3 (ex 801-3) IEC 1000-4-4 (ex 801-4) EN 61010-1 (IEC 1010-1) EN 1012-2
Power cable	w/ European or NEMA plug 3 meters long (optional)
Serial communication (Navigator kit)	RS 232 cable with a 9-pin D type male connector and a 9-pin D type female connector, and Navigator software (optional)
Installation category	II
Pollution degree	2
Storage temperature	– 20°C to + 70°C
Weight kg (lbs) Pump Controller	23.5 (51.8) 5.4 (12)

Request Quote:

*We do not share your information*

Name
Company
Address (City, State)
Country
Email
Email Confirmation
Phone
Your Budget/ Offer
Enquiry	Please send me a quote on this item.

Quality

Our refurbished instruments are tested and repaired to meet factory specifications. We follow Installation Qualification, Operational Qualification, and Performance Qualification protocols (IQ, PQ and OQ).

Expertise

Our team of skilled technicians are experts at fixing analytical instruments. We have been working with Agilent, Waters, Perkin Elmer, Sciex, Shimadzu, and Thermo instruments for many years. We are constantly updating our knowledge with the latest technology and information to enable us to deliver the best support in the industry. We provide value added support and qualification/validation with all our instruments. We endeavor to develop strategic partnerships with our clients so that they consider our team as an extension of their employees. We are an affordable alternative to many normally expensive business projects.

Warranty and Support

We offer warranty on all refurbished instruments. Warranty starts at 3 months, with the option to extend the period. While your instrument is on warranty, we will provide Email (support@spectralabsci.com) and phone support and troubleshooting if you require assistance. If there is ever anything wrong with the equipment, we will replace it. Warranty begins from the date your equipment is successfully delivered. Any issues that occur during warranty should be reported immediately, describing the issues in as much detail as possible. Do not attempt to repair the equipment or involve a 3rd party without our express permission – this will result in voiding our warranty.

We will match our warranty duration with our competitors.

Installation and Training

If you purchase equipment from Spectralab Scientific, we offer installation and familiarization by our service technicians for an additional fee. If the instrument is particularly complicated, we highly recommend this service. If you’ve purchased less-complex equipment from us that you would like to install yourself, we can provide Team Viewer, email, or telephone support for no additional cost.

Large Inventory

We have a large inventory of equipment, components and parts in stock. You can find all the equipment you need for you lab in our store, as well as mix and match components for your systems.

International Shipping

We have sufficient export experience, including professional packing and proper documentation. Complementary shipping and handling can be applied upon immediate purchase. We include customs fees, brokerage, and duties for shipping to the US.

Price Matching & Discounts

Purchasing our refurbished instruments can save you anywhere from 30% to 90% compared to purchasing brand new. We will try to match or beat any price from our competitors, so feel free to inquire! Complementary shipping and handling can be applied upon immediate purchase.