Agilent TV902 Turbo Vacuum Pump with Control Unit

Agilent TV902 Turbo Vacuum Pump with Control Unit
Item ID:


Condition: Refurbished

Availability: In Stock

Manufacturer: Agilent (HP)Price:

Request Quote/ Offer

Warranty Included, Onsite/ Remote Installation and Training Available


CAN/US: 3-5 business days
International: 5-10 business days

For assistance and further information:

Toll Free: 1-866-777-3688
Tel: 905-946-8066

Spectralab is your one stop shop for all your analytical laboratory needs!

Your source for


and Spectralab Scientific



We will match our competitor's price!

To Sell, Trade in, or Service Your Equipment

This set includes:

  • (1) Agilent TV902 Turbo Vacuum Pump (Model No. EX8698933R001)
  • (1) Agilent TV801 Control Unit (Model No. SQ337)

The Agilent TV 902 Navigator is composed by a pump (869-8933R001) with an envelope with fins and a shroud with two fans and a dedicated navigator controller (SQ 337). The pump is equipped with a custom ISO 160 F high vacuum flange. 4 pumps are available.

The Agilent TV902 Turbo Vacuum Pump is capable of operating at high foreline pressures because of the high speed to compression ratio. These pumps have silicon nitride, ceramic bearings.


Pumping speed (l/s) N2: 680 l/s, He: 810 l/s, H2: 850 l/s
Compression ratio N2: > 1 x 108, He: 1 x 105, H2: 1 x 104
Base pressure < 1 x 10-9 mbar
w/ recommended diaphragm fore pump: (< 1 x 10-9 Torr)
(According to standard DIN 28 428, the base pressure is that measured in a leak-free test dome, 48 hours after the completion of test dome bake-out, with a turbopump fitted with a conflat flange and using the recommended pre-vacuum pump)
Inlet flange custom ISO-160F
Foreline flange KF-25
Rotational speed 38,000 rpm
Start-up time < 4 minutes
Recommended forepump DS-402TriScroll 300
Operating position Any
Cooling requirements Forced air
Operating ambient temperature + 10°C to + 35°C
Bakeout temperature 120°C at inlet CF flange maximum 80°C with ISO flange
Vibration level (displacement) < 0.01 μm at inlet flange
Lubricant permanent lubrication
Noise level < 55 dB(A) at 1 meter
Power supply
Input voltage
Input freq.
Max input power
Stand-by power
Max operating power
100 – 240 VAC (± 10%)
50 – 60 Hz
600 VA
30 to 35 W
320 W with forced air
Protection fuse 1 x 8 A
Compliance with UNI EN 292-1
UNI EN 292-2
IEC 1000-4-2 (ex 801-2)
IEC 1000-4-3 (ex 801-3)
IEC 1000-4-4 (ex 801-4)
EN 61010-1 (IEC 1010-1)
EN 1012-2
Power cable w/ European or NEMA plug 3 meters long (optional)
Serial communication (Navigator kit) RS 232 cable with a 9-pin D type male connector and a 9-pin D type female connector, and Navigator software (optional)
Installation category II
Pollution degree 2
Storage temperature – 20°C to + 70°C
Weight kg (lbs)
23.5 (51.8)
5.4 (12)

Request Quote:

*We do not share your information*

Address (City, State)
Email Confirmation
Your Budget/ Offer

Our refurbished instruments are tested and repaired to meet factory specifications. We follow Installation Qualification, Operational Qualification, and Performance Qualification protocols (IQ, PQ and OQ).

Our team of skilled technicians are experts at fixing analytical instruments. We have been working with Agilent, Waters, Perkin Elmer, Sciex, Shimadzu, and Thermo instruments for many years. We are constantly updating our knowledge with the latest technology and information to enable us to deliver the best support in the industry. We provide value added support and qualification/validation with all our instruments. We endeavor to develop strategic partnerships with our clients so that they consider our team as an extension of their employees. We are an affordable alternative to many normally expensive business projects.

Warranty and Support
We offer warranty on all refurbished instruments. Warranty starts at 3 months, with the option to extend the period. While your instrument is on warranty, we will provide Email ( and phone support and troubleshooting if you require assistance. If there is ever anything wrong with the equipment, we will replace it. Warranty begins from the date your equipment is successfully delivered. Any issues that occur during warranty should be reported immediately, describing the issues in as much detail as possible. Do not attempt to repair the equipment or involve a 3rd party without our express permission – this will result in voiding our warranty.

We will match our warranty duration with our competitors.

Installation and Training
If you purchase equipment from Spectralab Scientific, we offer installation and familiarization by our service technicians for an additional fee. If the instrument is particularly complicated, we highly recommend this service. If you’ve purchased less-complex equipment from us that you would like to install yourself, we can provide Team Viewer, email, or telephone support for no additional cost.

Large Inventory
We have a large inventory of equipment, components and parts in stock. You can find all the equipment you need for you lab in our store, as well as mix and match components for your systems.

International Shipping
We have sufficient export experience, including professional packing and proper documentation. Complementary shipping and handling can be applied upon immediate purchase. We include customs fees, brokerage, and duties for shipping to the US.

Price Matching & Discounts
Purchasing our refurbished instruments can save you anywhere from 30% to 90% compared to purchasing brand new. We will try to match or beat any price from our competitors, so feel free to inquire! Complementary shipping and handling can be applied upon immediate purchase.

Featured Products

  • Thermo Scientific Exactive Orbitrap LC-MS



    Request QuoteView
  • Agilent 7000D Triple Quad GC-MS/MS (2018) with Intuvo 9000 GC and 7693 Liquid Autosampler



    Request QuoteView
  • Agilent 708-DS Dissolution Apparatus with 850-DS Autosampler and 8454 UV-Vis Spectrophotometer



    Request QuoteView