Boost your lab’s productivity by increasing sample throughput, achieving higher chromatographic resolution or automating sample preparation with the Thermo Scientific Dionex UltiMate DGP-3600SD Dual-Gradient Standard Pump. Take advantage of short sub-2μm particle columns for faster analyses that consume less solvent. This pump supports all standard LC applications and UHPLC applications up to 62MPa (9,000 psi/620 bar) at flow rates of up to 10mL/min. and is ideal for automating analyte enrichment or matrix elimination.
Features:
- Two ternary standard gradient pumps in a single instrument enclosure
- Serial dual-piston operating principle, low-pressure gradient proportioning
- Wide operating flow rate range from 200μL/min. to 10mL/min. with high flow rate accuracy
- Support of operating pressures of up to 62MPa (9,000 psi\620 bar)
- Thermo Scientific SmartFlow technology to automatically compensate for compressibility—no manual solvent setting needed
- Large selection of mixing volumes to perfectly balance gradient delay volume with mixing efficiency
- Active rear-seal wash to maximize seal lifetime and pump uptime
- Thermo Scientific Dionex Chromeleon Chromatography Data System software to easily synchronize and control two ongoing parallel runs
Specifications
Type | Specifications |
---|---|
Flow Accuracy and Reproducibility | ± 0.1% |
Flow Rate Range | 0.001 – 10mL/min |
Gradient Formation | Dual Low-Pressure Proportioning |
Operating Principle | Serial dual-piston |
Pump Pressure Range | 2–62 MPa (9000psi) |
Compressibility Compensation | Fully automated, independent of the composition of the mobile phase |
I/O Interfaces | 2 digital inputs, 2 relay outputs |
Flow Precision | <0.05% RSD or <0.01 min SD, whichever is greater |
Safety Features | Leak sensor |
Wetted Parts | Stainless steel, titanium, zirconium oxide, ruby, sapphire, aluminum oxide, PEEK, PTFE, ECTFE, FEP, UHMW polyethylene, perfluoro-elastomer |
Dimensions (h × w × d) | 16 × 42 × 51 cm |