All detectors and inlets include EPC. Please specify inlet and detector configurations before requesting quotation.
Detectors include but are not limited to: FID, NPD, RID, ECD, TCD, NCD, Mass Spec.
Autosamplers include but are not limited to: HP GC System liquid autosampler with 100 position sample tray and controller, 7673A/ 7673B liquid autosampler with 100 position sample tray and controller, 7694A headspace autosampler, G1888 headspace autosampler.
The Hewlett Packard HP 5890 Series II Gas Chromatograph is a chemical analysis instrument used for separating chemicals in a complex sample. This instrument uses a flow-through narrow tube known as the column, through which different chemical constituents of a sample pass in a gas stream (carrier gas, mobile phase); the constituents move at different rates depending on their various chemical and physical properties and their interaction with a specific column filling, called the stationary phase. As the chemicals exit the end of the column, they are detected and identified electronically. The function of the stationary phase in the column is to separate different components, causing each one to exit the column at a different time (retention time). Other parameters that can be used to alter the order or time of retention are the carrier gas flow rate and the temperature.
This system features:
- Compatible with ChemStation
- Time-table operation
- Diagnostic function
- Electronic pressure control option
- Power failure recovery
