Name: Shimadzu TOC-5000A Total Organic Carbon Analyzer
Brand: Shimadzu
SKU: toc-10-1100
Price: 1 USD
Availability: InStock

This refurbished Shimadzu TOC 5000A Total Organic Carbon Analyzer includes the ASI-5000A autosampler. This system will come as-is.

We have special expertise on analytical equipment. We encourage you to contact us to speak with one of our expert and professional team members.

Thanks for looking and we look forward to hearing from you!

Analyte	TC, IC, TOC (TC-IC), NPOC (non-purgeable organic carbon), POC (purgeable organic carbon: option)Method Combustion/non-dispersive infrared gas analysis method)
Combustion temperature	680° C
Measuring range	4ppb to 4000ppm (to 5000ppm for IC) (POC: Max 400ppm)
Average analysis time	2 to 3 minutes for both TC and IC (4.5 minutes for TC and 3.5 min. for IC at the longest)
Repeatability	Standard deviation is less than 1% of full scale for the range less than 2000ppm to 4000ppm (from 2500ppm to 5000ppm for IC)
Sample introduction	Automatic injection via microliter syringe
Sample injection volume	500 to 2000µL with a 2500 µL syringe, 4 to 250 µL with a 250 µL syringe
Pretreatment for IC	Automatic sparging function
Carrier gas	Cylinder of ultra-high purity air or oxygen; about 6kgf/cm2 (7kgf/cm2 max.) in supply pressure; 150 mL/min. in flow rate (300mL/min. including sparging)
Data processing
Detector signal	Linearization, baseline correction, peak detection, and area calculation
Data	Calculation of concentration using one-point to four-point calibration curve; automatic selection of best calibration curve; store up to 18 calibration curves; automatic exclusion of anomalous value(s) and automatic re-analysis/re-calculation; calculation of standard deviation and coefficient of variation, automatic re-analysis with different measurement range and/or different sample volume when response goes off scale.
Instrument control	Aspiration, measurement, and injection sample; TC furnace temperature; ON/OFF of carrier gas and sparge gas.
Other features	Automatic selection of the optimum set of operation conditions; maintenance/self-diagnostics, warning of abnormality; timer for restarting from the running mode.
Display	White liquid crystal display with back-light, 640X400 dots, 88 characters x 22 lines.
Printer	Thermal, 240-dot graphic printer, 40 characters/line, 110 mm in chart width. External dot matrix: option.
Ambient temperature requirements	5° to 35° C
Power requirements	100, 110, 115, 120, 127, 220, 230, or 240V as ordered, ±10%, 50/60Hz, about 300 VA power consumption. (800-1200VA.)

Request Quote:

*We do not share your information*

Name
Company
Address (City, State)
Country
Email
Email Confirmation
Phone
Your Budget/ Offer
Enquiry	Please send me a quote on this item.

Quality

Our refurbished instruments are tested and repaired to meet factory specifications. We follow Installation Qualification, Operational Qualification, and Performance Qualification protocols (IQ, PQ and OQ).

Expertise

Our team of skilled technicians are experts at fixing analytical instruments. We have been working with Agilent, Waters, Perkin Elmer, Sciex, Shimadzu, and Thermo instruments for many years. We are constantly updating our knowledge with the latest technology and information to enable us to deliver the best support in the industry. We provide value added support and qualification/validation with all our instruments. We endeavor to develop strategic partnerships with our clients so that they consider our team as an extension of their employees. We are an affordable alternative to many normally expensive business projects.

Warranty and Support

We offer warranty on all refurbished instruments. Warranty starts at 3 months, with the option to extend the period. While your instrument is on warranty, we will provide Email (support@spectralabsci.com) and phone support and troubleshooting if you require assistance. If there is ever anything wrong with the equipment, we will replace it. Warranty begins from the date your equipment is successfully delivered. Any issues that occur during warranty should be reported immediately, describing the issues in as much detail as possible. Do not attempt to repair the equipment or involve a 3rd party without our express permission – this will result in voiding our warranty.

We will match our warranty duration with our competitors.

Installation and Training

If you purchase equipment from Spectralab Scientific, we offer installation and familiarization by our service technicians for an additional fee. If the instrument is particularly complicated, we highly recommend this service. If you’ve purchased less-complex equipment from us that you would like to install yourself, we can provide Team Viewer, email, or telephone support for no additional cost.

Large Inventory

We have a large inventory of equipment, components and parts in stock. You can find all the equipment you need for you lab in our store, as well as mix and match components for your systems.

International Shipping

We have sufficient export experience, including professional packing and proper documentation. Complementary shipping and handling can be applied upon immediate purchase. We include customs fees, brokerage, and duties for shipping to the US.

Price Matching & Discounts

Purchasing our refurbished instruments can save you anywhere from 30% to 90% compared to purchasing brand new. We will try to match or beat any price from our competitors, so feel free to inquire! Complementary shipping and handling can be applied upon immediate purchase.