Thermo Finnigan Surveyor Autosampler Plus

Thermo Finnigan Surveyor Autosampler Plus
Item ID:


Condition: Refurbished

Availability: In Stock

Manufacturer: Thermo Fisher ScientificPrice:

Request Quote/ Offer

Warranty Included


CAN/US: 3-5 business days
International: 5-10 business days

For assistance and further information:

Toll Free: 1-866-777-3688
Tel: 905-946-8066

Spectralab is your one stop shop for all your analytical laboratory needs!

Your source for


and Spectralab Scientific



We will match our competitor's price!

To Sell, Trade in, or Service Your Equipment

The Thermo Finnigan Surveyor Autosampler Plus is specifically designed to maximize throughput, the Finnigan Surveyor Autosampler Plus has a novel sampling arm design minimizing excess movement, maximizing the number of injections in a given time. Injection cycles less than 30 seconds can be achieved using the Finnigan Surveyor Autosampler Plus. The Autosampler Plus holds 200 standard 1.8 mL sample vials or a tray insert with three 96 or 384 well microtiter plates. The built-in syringe flush and needle wash minimze carryover. The Finnigan Surveyor Autosampler Plus heat exchanger equilibrates the mobile phase prior to sample introduction.


Vial Capacity 200 vials with tray temperature control, Three 96 or 384-Well Microtiter Plates
Injection Precision 1.0% RSD at 5 uL and higher
Minimum Sample Volume 1 uL can be injected from a 5 uL sample
Injection Volume 20 uL loop standard, up to 1000 uL injections with larger loops and syringe
Sample Carryover 0.1%, 6 mL flush can be used for internal and external needle wash
Needle Height Programmable in 0.1 mm increments.Active vial bottom search selectable on/off
Column Oven 5°C to 95°C +/- 0.5°C selectable in 1°C increments.
Tray Temperature Control 0°C to 60°C +/- 0.5°C selectable in 1°C increments
Remote Inputs Pump Ready and Inject Hold
Remote Outputs Pump Stop, Autosampler Plus Ready, Inject, and Gradient Start, 4 Timed Events
Remote Controls Ethernet interface for PC-based software control.
Sample Preparation Capacity for 4, 15 mL reagent vials for flushing, washing, sample dilution, and/or reagents for sample derivatization
Ambient Environment 10°C to 40°C, 5 to 95% relative humidity, non condensing
Operating Temperature 10 °C to 40 °C
Dimensions (H×W×D) 37 × 36 × 50 cm
Power Requirements 100/120/220/240 Vac nominal; 550VA, 50/60Hz
Product Certification EMC, CE, TUV-C/US, FCC (EMI)

Request Quote:

*We do not share your information*

Address (City, State)
Email Confirmation
Your Budget/ Offer

Our refurbished instruments are tested and repaired to meet factory specifications. We follow Installation Qualification, Operational Qualification, and Performance Qualification protocols (IQ, PQ and OQ).

Our team of skilled technicians are experts at fixing analytical instruments. We have been working with Agilent, Waters, Perkin Elmer, Sciex, Shimadzu, and Thermo instruments for many years. We are constantly updating our knowledge with the latest technology and information to enable us to deliver the best support in the industry. We provide value added support and qualification/validation with all our instruments. We endeavor to develop strategic partnerships with our clients so that they consider our team as an extension of their employees. We are an affordable alternative to many normally expensive business projects.

Warranty and Support
We offer warranty on all refurbished instruments. Warranty starts at 3 months, with the option to extend the period. While your instrument is on warranty, we will provide Email ( and phone support and troubleshooting if you require assistance. If there is ever anything wrong with the equipment, we will replace it. Warranty begins from the date your equipment is successfully delivered. Any issues that occur during warranty should be reported immediately, describing the issues in as much detail as possible. Do not attempt to repair the equipment or involve a 3rd party without our express permission – this will result in voiding our warranty.

We will match our warranty duration with our competitors.

Installation and Training
If you purchase equipment from Spectralab Scientific, we offer installation and familiarization by our service technicians for an additional fee. If the instrument is particularly complicated, we highly recommend this service. If you’ve purchased less-complex equipment from us that you would like to install yourself, we can provide Team Viewer, email, or telephone support for no additional cost.

Large Inventory
We have a large inventory of equipment, components and parts in stock. You can find all the equipment you need for you lab in our store, as well as mix and match components for your systems.

International Shipping
We have sufficient export experience, including professional packing and proper documentation. Complementary shipping and handling can be applied upon immediate purchase. We include customs fees, brokerage, and duties for shipping to the US.

Price Matching & Discounts
Purchasing our refurbished instruments can save you anywhere from 30% to 90% compared to purchasing brand new. We will try to match or beat any price from our competitors, so feel free to inquire! Complementary shipping and handling can be applied upon immediate purchase.

Featured Products

  • Agilent 6490 Triple Quadrupole LC/MS System



    Request QuoteView
  • Thermo Scientific Q-Exactive Quadrupole-Orbitrap LC-MS

    Sold OutCondition:


    Request QuoteView
  • Thermo TSQ Endura LC-MS/MS with Vanquish UHPLC front end



    Request QuoteView